RS Tera Cunningham Race Pack
 
The Allen 6:1 RS Tera Cunningham race pack is fully spliced for ease of installation, reliability and maximum performance.
 
During first installation the Dyneema with dog bone needs to be tied around the gooseneck (see image).
 
The dog bone then allows quick and easy hooking and un-hooking of the Cunningham control system.
 
Featuring Marlow rope and Allen dynamic blocks for maximum friction reduction.
 
The pack also includes a soft shackle for the mast base, 2 x 20mm blocks for the mast base and plastic rope handle.
 
 
Allen Tera Cunningham Pack Installation
Take the thinnest Dyneema with the dog bone spliced half way and feed it, from the top down, through the hole on the gooseneck sleeve on the mast.
Take each end a full turn in opposite directions around the mast and then tie the ends together. Ensure the dog bone sits just above the boom collar when connected.
 
Attached the soft shackle with two 20mm blocks (A2020) to the base of the mast. Ensure the soft shackle is fed through the metal lacing eye on the mast.
 
Feed the spliced loop on the end of the Dyeenma which is spliced to the 30mm block (A2030Tii) through the eye at the tack of the sail. Then secure using the dog bone installed around the gooseneck.
 
Rig the orange control line by taking the end and feeding it through one of the 20mm blocks, back up through the 30mm block, down through the cleat on the mast and then through the last 20mm block.
Attach the plastic handle at the optimum position using a bowline.
 
Note
Some pics show all the different systems together, this is just to show how they work together, and they do not all come as one race pack