top of page

Allen RS Tera Racing Outhaul Pack

Upgrade your RS Tera's outhaul system with the Allen RS Tera Racing Outhaul Pack. Designed for racing, this pack brings together Allen dynamic blocks and Marlow rope to provide a practical, efficient outhaul control system for your dinghy.

The pack includes a block spliced onto the primary line and a soft shackle to simplify installation. It also features a clew tie-down strap incorporating an Allen dog bone for easy attachment, plus an elastic take-up line with snap shackle.

Installation requires two knots to be tied at the end of the boom.

For the best setup, this pack works particularly well alongside the Allen RS Tera Racing Vang Pack, which allows improved installation and routing of the outhaul control line.

What's included?

  • Allen dynamic blocks

  • Marlow rope

  • Block spliced onto the primary line

  • Soft shackle for installation

  • Clew tie-down strap with Allen dog bone

  • Elastic take-up line with snap shackle

  • Control-line handle component

Allen RS Tera Outhaul Pack Installation Guide

  1. Install block 1: Thread the Dyneema attached to block 1 through the hole in the clew fitting at the end of the boom. Tie a stopper knot to hold the block as close to the end of the boom as possible. Once you are confident the knot is secure and will not slip, trim any excess rope if required.

  2. Rig the primary outhaul line: Thread rope 2 through block 1, then through the clew of the sail. Tie a stopper knot at the end of the rope and hook the stopper knot onto the end of the boom.

  3. Attach block 3: Undo the soft shackle on block 3 and pass it around the lacing eye at the inboard end of the boom. Reattach the soft shackle securely.

  4. Route the blue control line: Place the spliced loop over the peg of the clam cleat on the boom. Feed the other end of the rope through block 2, then back through block 3. If you also have the Allen RS Tera Racing Vang Pack, feed the blue rope through the top thimble of the vang pack as well.

  5. Fit the handle: Part 7 can be tied to the end of the control line to act as a plastic handle.

  6. Attach the clew strap: Feed the spliced loop and dog bone through the clew of the sail, take it around the boom and hook the dog bone into place.

  7. Fit the elastic take-up line: Tie a bowline around the lacing eye at the inboard end of the boom. Clip the snap shackle onto the clew strap to provide the take-up function.

Important note

Some product photographs show several different systems fitted together to demonstrate how the components work in combination. These systems are not all included in this racing outhaul pack. Please refer to the included components listed above when ordering.


Allen RS Tera Outhaul Pack. (AL-TERA-0P)

£99.05 Regular Price
£91.13Sale Price
Quantity
    bottom of page