New large (external)
 
Overall size 143mm x 79mm
Hole size 105mm x 40mm
 
The world-famous Andersen self bailer is fitted as standard equipment by many of the world's leading boat builders and renowned for its efficient design and reliability.
Manufactured from marine grade stainless steel, each bailer is supplied boxed with stainless steel fixing nuts, bolts, packing washers and integral grid.
 
 
OUTSIDE MOUNTED BAILERS
 IB-E002 Large
Select desired location for the bailer (consider class rules are applicable). Mark outline of the bailer using the supplied template.
Cut the hole for the bailer with a jigsaw. Fill and seal the cut surfaces with a waterproofing agent to ensure water ingress is minimised.
Mark the mounting holes by installing the bailer into the hole just cut.
Drill out the mounting holes as required:
RA574154 Large - 6 holes @ 5.5mm (7/32”) diam.
Countersink mounting holes as per diagrams below.
Mount the bailer in position using a marine grade sealant or waterproofing product around the contact surface between the bailer and the hull.
Affix the bailer with nuts and bolts provided, applying silicon to the bolt holes.
Bolts should be cut to length and smoothed following installation.
See Service Kit Installation sheet for gasket replacement.
 
*Cutting and installing through-hull and skin fittings should be conducted by appropriately skilled or qualified individuals.
 
Service kits and grids available, just message us.