Our batten pusher is designed for pushing in, & releasing velcro batten pocket tabs at the end of the batten pocket.

Easy to use to both push in and undo the batten pocket velcro tab.
 
(approx)
15mm or 30mm wide
211mm long
2.4mm thick

Made from GRP with lanyard long enough to pass over itself,
so you can loop it through a hand hold, or eye near the main hatch, or around the base of the mast,
The Pocket Pusher is made from reclaimed offcuts of sail battens and ropes, helping to keep waste out of landfill.
 
This handy item will save you from lost battens or lost races. 

Don't lose a batten just because the tab has not been put in properly.